Freeman and Industry Associations Find Common Ground on Rigging Safety Regulations

February 14, 2024

Last August, Freeman announced a rigging safety initiative that impacted exhibitors and event organizers with hanging signs, video walls that have overhead support and all other tie-offs. The rigging rule could have potentially affected thousands of exhibiting companies and events across the U.S. with higher costs and longer timelines. 

In response, Exhibition Services & Contractors Association (ESCA), The Exhibitor Advocate and Experiential Designers & Producers Association (EDPA) collaborated with Freeman to roll back some of the requirements, making it faster, easier and cheaper for exhibiting companies and event organizers to reuse hanging signs, video walls and other tie-offs that have been previously certified by a professional engineer.

Context: Citing an American National Standards Institute (ANSI) Safety Recommendation from 2017, Freeman’s rigging policy issued in August 2023 implemented the following requirements, according to the Exhibitor Appointed Contractors Association (EACA):

  • All fully suspended structures and/or tie offs will likely require a Professional Engineering (PE) Stamp from the state where the event is being held. Exhibitors should check with Freeman prior to the show to determine if the display needs a stamp.
  • All Engineered Drawings must have a new PE Stamp each year.
  • All Engineered Drawings must have the following: a depiction of the tie off; how the tie off will attach to the structure; the hardware that must be used on the structure itself (all load-bearing hardware must be domestically manufactured, forged and stamped); and building material used to construct the structure.
Trade show rigging
Rigging at NAMM 2024 booth

What The Exhibitor Advocate is saying: “The Exhibitor Advocate, along with our partners at EDPA and ESCA, approached Freeman with concerns from exhibitors on a rigging regulation that began rolling out in August of 2023,” explained Jessica Sibila, executive director of The Exhibitor Advocate. 

“We’re pleased that Freeman heard the concerns of exhibitors and agreed to revise the regulation to allow engineering stamps to be accepted regardless of what state and what year in which the stamp was acquired, as long as there had been no structural changes. The revised regulation maintains the safety of our show floors without adding unnecessary cost and burden to exhibitors. The resolution of this issue reaffirms the power of partnerships and the solutions that can be realized when we collaborate as an industry.”

What Freeman is saying:  “At Freeman, we are focused on creating meaningful moments, delivered safely,” said Freeman’s Chief Operating Officer, Event & Exhibit Services, Chris Schimek. “Our commitment to maintaining safe and secure events for our customers, attendees and employees is paramount to our business and the industry at large. This past fall, we updated our policies surrounding overhead structures to be fully compliant with the latest ANSI standards. After further conversations with our partners and customers, we have since revised our standards. The new standards are available today in show-specific exhibitor kits.

“In the revised standards, Freeman will continue to require engineering stamps for overhead structures and tie-offs. We will accept engineering stamps issued by structural or civil engineering firms in the United States. The engineering stamps are valid if the structure has not been modified from the time of the original design stamp and as long as the venue, municipality or state codes do not supersede Freeman guidelines. This means, if an exhibitor’s structure has previously been approved, and nothing changes, the original engineering stamp is still valid at any other Freeman event within the United States—as long as venue, municipality, or state codes match or do not exceed Freeman’s guidelines. These specific codes will always take precedence over Freeman standards.

“With regard to hanging signs and graphics, any sign or hung structure over 250 lbs. will require a secondary lifting device. Freeman will always adhere to the strictest guidelines for each event. This means when facilities have more stringent weight guidelines, Freeman will adhere to the facilities requirements. Detailed guidelines are available to exhibitors online within their show’s exhibitor kit.”

Trade show rigging
The rigging rule impacts hanging signs like this one at the 2024 NAMM Show.

What ESCA is saying: “In the revised standards, Freeman will continue to require engineering stamps for overhead structures and tie-offs. The Engineering Stamp Requirements dictate that the stamp must be issued by a U.S.-based structural or civil engineering firm (without regard to acquisition by specific state and/or year), ensuring the original design remains unaltered, with local codes taking precedence. As for hanging signs and graphics, structures over 250 lbs. necessitate a secondary lifting device. Where applicable, all parties involved will adhere to guidelines set forth by facilities, ensuring safety and compliance with local facility and municipality codes.”

ESCA Executive Director Julie Kagy added, “Coming together with ESCA, EDPA, The Exhibitor Advocate and Freeman to address safety concerns in the exhibitor industry has been an incredible collaborative effort. Hearing diverse perspectives and engaging in transparent communication has underscored the importance of prioritizing safety while maintaining clarity and consistency for exhibitors. This joint initiative reflects our collective commitment to excellence and industry-wide standards. We're excited about the positive impact these revised regulations will have on trade show safety and look forward to continuing our collaborative efforts in the future."

What EDPA is saying: “EDPA has been a leader in advancing the trade show and event industry with a number of initiatives focused on workforce development and sustainability. We are excited to further partner with our sister associations to continue to build upon these efforts,” said Dasher Lowe, EDPA Executive Director.

What’s next: "As part of our ongoing commitment to promoting safety and excellence in the exhibitor industry, ESCA will soon be rolling out an official set of suggested guidelines for our membership and the industry at large to utilize,” Kagy said. “These guidelines, developed in collaboration with industry partners and informed by best practices, will provide valuable insights and recommendations to ensure the highest standards of safety and compliance at trade shows and events. We're excited to share these guidelines with our members and the industry in the weeks to come, further reinforcing our dedication to advancing safety standards and fostering excellence.”


Don’t miss any event-related news: Sign up for our weekly e-newsletter HERE, listen to our latest podcast HERE and engage with us on LinkedIn!

Add new comment

Partner Voices
Overview: The award-winning Orange County Convention Center (OCCC) goes the extra mile to make every day extraordinary by offering customer service excellence and industry-leading partnerships. From their dedicated in-house Rigging team to their robust Exhibitor Services, The Center of Hospitality brings your imagination to life by helping you host unforgettable meetings and events. With more than 2 million square feet of exhibit space, world-class services and a dream destination, we are committed to making even the most ambitious conventions a reality. In October 2023, the Orange County Board of County Commissioners voted to approve allocating Tourist Development Tax funding for the $560 million Phase 5A completion of the OCCC. The Convention Way Grand Concourse project will include enhancements to the North-South Building, featuring an additional 60,000 square feet of meeting space, an 80,000- square-foot ballroom and new entry to the North-South Building along Convention Way. “We are thrilled to begin work on completing our North-South Building which will allow us to meet the growing needs of our clients,” said OCCC Executive Director Mark Tester. “As an economic driver for the community, this project will provide the Center with connectivity and meeting space to host more events and continue to infuse the local economy with new money and expanding business opportunities.” Amenities: The Center of Hospitality goes above and beyond by offering world-class customer service and industry-leading partnerships. From the largest convention center Wi-Fi network to custom LAN/WAN design, the Center takes pride in enhancing exhibitor and customer experience.  The OCCC is the exclusive provider of electricity (24-hour power at no additional cost), aerial rigging and lighting, water, natural gas and propane, compressed air, and cable TV services. Convenience The Center is at the epicenter of the destination, with an abundance of hotels, restaurants, and attractions within walking distance. Pedestrian bridges connect both buildings to more than 5,200 rooms and is within a 15-minute drive from the Orlando International Airport. The convenience of the location goes hand-in-hand with top notch service to help meet an event’s every need. Gold Key Members The OCCC’s Gold Key Members represent the best of the best when it comes to exceptional service and exclusive benefits for clients, exhibitors and guests. The Center’s Gold Key memberships with Universal Orlando Resort, SeaWorld Orlando and Walt Disney World greatly enhance meeting planner and attendee experiences offering world-renowned venues, immersive experiences and creative resources for their events. OCCC Events: This fiscal year, the OCCC is projected to host 168 events, 1.7 million attendees, and $2.9 billion in economic impact.  The Center’s top five events during their 2022-2023 fiscal year included:  AAU Jr. National Volleyball Championships 2023 200,000 Attendees $257 Million in Economic Impact MEGACON 2023 160,000 Attendees $205 Million in Economic Impact Open Championship Series 2023 69,500 Attendees $89 Million in Economic Impact Sunshine Classic 2023 42,000 Attendees $54 Million in Economic Impact Premiere Orlando 2023 42,000 Attendees $108 Million in Economic Impact